Lädt...
SPÄH mechanical produced parts - punched parts, turned and milled parts, cast and mold parts, water-jet cut parts

Punched parts

Turned and milled parts

Cast and moulded parts

Water-jet cut parts

Punched parts

The Punched Parts Product Unit includes different products, e.g. insulation components, felt rings, washers, rubber strips, plastic sections and other stamped bought-out parts. Depending upon the material (Plastics like EPDM, polycarbonate, foam rubber, etc.), quantity and design, we produce these with various punching tools, manufactured in our own tool-making shop. Since we have over 5000 different material variants in stock, on-schedule delivery to all locations can be assured. We also offer a differentiated range of services.

Materials

All non-metallic materials such as:

  • butylene
  • EPDM
  • CR
  • NBR
  • SBR
  • silicone
  • FKM 
  • diaphragm material
  • AFM
  • EWP
  • Klingersil
  • Novapress
  • polyurethane
  • VULKOLLAN®
  • PTFE
  • graphite,
  • Abil
  • Faserflex
  • rubber
  • cork hard fabric
  • hard paper 
  • polyamide
  • polycarbonate
  • polyethylene
  • polystyrene
  • pressed cork
  • Vulkanfiber
  • Inducon 

We are also happy to work on a piece-rate basis with your own materials. Have a look at the list of standard materials that are workable by us: go to materials

Shapes, dimensions, applications

Punching with strip steel tools: approx. 2000 x 1150 mm
Sharp and crosscut blades: approx. 1 mm to ~200 mm ø

Service 

  • designation by print or embossing
  • self-adhesive on one or both sides to facilitate assembly
  • left on belt for automatic delivery
  • with silicone bead to improve seal tightness on bend-resistant components
  • individual part cleaning
  • packaging to your choice

Have a look at our processing methods and the download area, too.

Do you have questions about our products?

Please get in touch with us via contact form or directly ask our contact persons.

Used as the following products in all industry sectors:

  • Adhesive films
  • Anti-corrosive rings
  • Buffers
  • Conveyor belts
  • Covering plates and covering strips
  • Cuts, foam cuts, PVC cuts
  • Dairy pipe screw connection rings
  • Damping and damping rings
  • DIN rings
  • Distance pieces
  • Dust seals
  • Felt rings
  • Fitting parts
  • Flat belts
  • Foam stamped parts
  • Heat-conducting pads
  • Insulating parts
  • Insulating parts/insulation parts/insulating discs
  • Membranes
  • Molded rings
  • Packing rings
  • Perforated plates
  • Plastic cuts, rings and strips
  • Plotter parts
  • Precision parts
  • Profiles
  • Rubber rings
  • Rubber strips
  • Screw connection rings
  • Sealing rings
  • Sealing strips
  • Shieldings (EMC parts)
  • Spacers
  • Tapes, self-adhesive tapes, PVC tapes
  • Thrust rings
  • Valve flaps
  • Washers
  • and many more

Cost-effective production of stamped parts with strip steel blade

We produce stamped seals with a component size of max. 2000 x 1200 mm from elastomers, plastics and soft fibre materials with strip steel blades. Punched parts of all kinds can, for example, be found in transportation and logistics, as well as in the construction industry.


Visit download area for more information

Punched parts produced using sharp-cut blades

We produce elastomer stamped parts and rubber rings up to diameters of 160 mm, with self-produced solid sharp-cutting tools, from a vast array of soft seal materials. In all sectors, e.g. automotive construction and medical technology, our bought-out parts perform important functions.


Visit download area for more information

Versatile applications - small stamped parts

Punched parts made of all non-metallic seal materials, e.g. insulation materials, foam materials, silicone, cork, kraft paper, kraft fabric and many other elastomers and plastics perform important tasks in many sectors as multifunction construction components.


Visit download area for more information

Punched parts with individual designation

The addition of a pad print or of punching to identify a part is, alongside a wide range of other product-related services, a benefit that SPÄH can bring to bear to enhance any end product. You will find the flyer with more extensive information about the services that accompany production here.


Visit download area for more information

Order-related manufacture of bought out parts

Our core expertise lies in the manufacture of seals and stamped parts in any desired version and from any conceivable seal material, and in any quantity, from a drawing, specification or sample for the most diverse of applications.


Visit download area for more information

Punched parts made of polyurethane and Vulkollan®

The highly-flexible polyurethane range of semi-finished goods from QUADRIGA is the starting point for the manufacture of stamped, water-jet-cut and other mechanically manufactured C parts for all sectors and applications, e.g. ultra-abrasion-resistant gaskets in the mechanical engineering and plant construction sectors.


Visit download area for more information

High-pressure seal material UNITEC® 300

The universal SPÄH high-pressure gasket material with approvals from BAM, DVGW, HTB, KTW, WRC and W 270, and with good chemical, mechanical and thermal properties. The flexible soft fibre material is suitable for gaskets and stamped parts in pumps, fittings, compressors and many other fields of application.


Visit download area for more information

SPÄH Service Kiss-Cut parts

One-sided self-adhesive shaped stamped parts made of soft sealing and insulation materials as well as elastomers, foam materials, cellular rubber and soft plastics, left on the belt. The benefits include distortion-free delivery of stamped parts as well automatic acceptance and scope for further processing.


Visit download area for more information

You have any question about our products?

Please feel free to contact us using our form or contact your sales representative directly:

Joachim Blickle

T +49 7572 602-162 | vertrieb.nord(at)spaeh.de

Turned and milled parts

The precise, mechanical processing of thermoplastic standard and high-performance plastics and elastomers with high-performance automatic CNC turning machines as well as milling and machining centres is yet another focal point of our production operations - from batch sizes of 1. This covers a wide range of rational processing operations for rods and panels. Permanent material availability prevents bottlenecks and improves on-schedule delivery performance.

Materials

All plastics like

We can process further materials on request. You can find an overview of our most current material types on our material page.

Teilegrößen

  • Rod machining in diameters of up to 100 mm
  • Chuck machining of diameters of up to 3000 mm
  • Panel processing up to 3000 x 2000 x 70 mm (L x W x H)
  • Milling machining centre 410 x 280 x 160 mm (L x W x H)

    Produced by ourselves with CNC precision.

Used as the following products in all industry sectors:

  • Automatic castors
  • Axle parts and axle components
  • Bearings
  • Bellows
  • Bushes
  • Chain slide rails
  • Chain wheels
  • Chuck turned parts
  • Clamping plates and clamping rings
  • Clip-on sleeves
  • CNC milled parts
  • CNC turned parts
  • Connecting elements
  • Covers
  • Damping elements
  • Drive elements
  • Fastenings
  • Gear wheels
  • Guides, guide rings and guide shafts
  • Lids
  • Molded parts
  • O-rings
  • Plastic bolts
  • Plastic nuts, e.g. spindle nuts or union nuts
  • Precision turned parts
  • Pressure castors
  • Pressure pipes and pressure hoses
  • Protective parts
  • Scrapers
  • Screw conveyors
  • Screw fittings
  • Sealing rings
  • Sleeves
  • Slide bearing, slide plates
  • and slide rails
  • Spacing tubes
  • Spring elements
  • Spring rings
  • Support rings
  • Threaded rings
  • Track castors and swivel
  • castors
  • Turned fitting parts
  • Wear parts
  • and many more

Precise processing of elastomers and high performance plastics

SPÄH Plastic joint for suspension system

SPÄH Dreh und Frästeil - Gelenkhalterung für Tragsystem

 

Turned and milled parts made with high-performance automatic CNC turning machines as well as milling and machining centres. The basis for this is our well-assorted and semi-finished inventory of plate material in all standard sizes. A short-term production consignment is possible at any time, and bottlenecks regarding working materials are avoided, thus enabling us to guarantee our supply deadlines. We can produce big precise plastic parts with turning and milling centres according to your needs. Picture above: a plastic joint made of POM C for for suspension Systems.

 

Visit download area for more information

Turned and milled products according your wishes

[Translate to Englisch:] SPÄH Abdeckungen, Abstandshalter, KAbel-Mitnehmer, Kunststoffteile, Verschraubungsringe, etc.

SPÄH Abdeckungen, Abstandshalter, Kabel-Mitnehmer, Dichtungen, Kunststoffteile, etc.

When processing the plates we can thus provide you with holes to be cut, chamfered edges, recesses, patterns, lettering or other contours to be milled. Standard CNC-milled parts made of plastic plates are (for example): skimmers, bumper stops, driving plates, faceplates, retainers and much more. The consignment process is quite simple for you. You merely send us your DXF or DWG specifications and we configure the data into the plotter, and the component production can begin immediately. If the specifications are not available, we can generate, for a fee, the required CNC programme from your drawing.

 

Visit download area for more information

CNC turned parts and CNC milled parts

[Translate to Englisch:] SPÄH Drehteil - Armaturteil Wasserhahn

We use all plastics – in particular PA, PC, PE, PEEK, POM, PP, PS, PTFE and PUR (polyurethane, VULKOLLAN®). We can process further materials on request. You can find an overview of our most current material types on our material page. Picture above: valve part of a water tap.

 

Visit download area for more information

Multi-functional construction components

[Translate to Englisch:] SPÄH Drehteile ind Frästeile aus Kunststoff

SPÄH turned parts and milled parts, mainly made of plastics, are used in all industries. For example as covers, bushes, damping elements, lids, pressure pipes and pressure hoses, spring elements, guides, guide rings and guide shafts, plastic bolts, bearings, o-rings, protective parts, spiral rings, support rings, wear parts, screw fittings, gear wheels and much more.

 

Visit download area for further information

Customized manufacturing of CNC parts

[Translate to Englisch:] SPÄH Nudelwalze - Dreh und Frästeile

We produce turned seals such as ring seals, thrust rings, spiral rings and O-rings as well as other shaped rings and/or many technical parts. Rod machining in diameters of up to 100 mm, chuck machining of diameters of up to 3000 mm, panel processing up to 3000 x 2000 x 70 mm (L x W x H), milling machining centre 410 x 280 x 160 mm (L x W x H). The applications vary: shown above is a plastic roller for producing pasta.


Visit download area for more information

CNC precision for all industry sectors

[Translate to Englisch:] SPÄH Kabel-Mitnehmer für CNC-Maschinen

We process all common plastics for order quantities from just 1 unit. We serve all industries from sanitary/heating/air conditioning to medical technology. The figure shows: a plastic carrier for cable bundles in a CNC machining Center.


Visit download area for further information

You have any question about our products?

please feel free to contact us using our form or contact your sales representative directly:

Alfred Blum

T +49 7572 602-165 | vertrieb.duf(at)spaeh.de

Cast and moulded parts

With high-performance casting plant and an in-house mold-building shop, QUADRIGA, based in Norderstedt, can offer you anything from a single component to a long production run from its ultra-flexible range of polyurethane casts and moulded parts. A broad range of semi-finished PUR materials rounds off its service scope.

Materials:

  • PUR (polyurethane and VULKOLLAN®*)
  • Polytan
  • PUR/metal
  • PUR/plastic

* VULKOLLAN® is a registered trademark of Covestro Group.

You can find an overview our current material types on our material page.

Shapes and dimensions

  • Semi-finished goods standard sizes:
    Panels 0,5 - 50 mm thick
    Round bars 5 thru 230 mm ø
    Ground bars 5 thru 34 mm ø
    Blocks, stripes, square rods, tubes on request

  • Special products:
    Other thicknesses
    Oversize formats of up to 4000 x 2000 mm and/or up to 7000 x 1000 mm
    Reinforced panels with metal insert
    Individual hardness settings
    Special colours

    Including cut-to-size service and mechanical finish-machining.

Used as the following products in all industry sectors:

  • Buffers
  • Bushes
  • Clutch packets and
  • clutch elements
  • Concrete wear parts
  • Cuffs
  • Damping elements
  • Drive elements
  • Elastomer spring elements
  • Elements of the drive- and conveyor technology
  • Fan discs
  • Gear wheels and toothed belts
  • Grinding discs
  • Heavy load castors
  • Layers of mixing and screening systems
  • Membranes
  • Mixer linings
  • Moldings according to drawing, sample or specifications
  • Products made of polyurethane and VULKOLLAN®
  • Protective vice jaws
  • PUR-metal joints
  • Retaining rings
  • Snow clearing
  • Stop buffers
  • Strips/snow scraper bars
  • Vibration dampers
  • Wear parts
  • Wheels, castors and rollers
  • and many more

Snow scraper bars made from VULKOLLAN® D15 / Polyurethane D44

[Translate to Englisch:] Schneeräumleisten von QUADRIGA

Schneeschürfleisten von QUADRIGA Polyurethane

High wear resistance, low abrasion even on rough road surfaces and at the same time elastic enough to absorb unevenness, these properties make VULKOLLAN®* and Polyurethane the ideal material for end bars on the shovels of snow clearing vehicles. Road surface and clearing equipment are thus optimally protected. The high tear resistance permits permanent screw connections. The far better properties enable significantly longer use than with conventional rubber strips made from SBR or NBR.

 

 

You can find further Information here: www.quadriga-polyurethane.com

 

* VULKOLLAN® is a registered trademark of Covestro Group.

Concrete-wear parts made of PUR

[Translate to Englisch:] Betonverschleißteile von QUADRIGA

Concrete-wear parts made from polyurethane D44 are used as mixing tools for abrasive bulk goods in the most varied mixing- and recycling plants of the concrete- and asphalt industry in the form of vanes, arm guards, scrapers, mixing arms etc. Our Polyurethane D44 is an excellent polyurethane elastomer based on polyester-polyol and MDI. It is distinguished above all by its attractive price and its convincing properties.

 

You can find further Information here: www.quadriga-polyurethane.com

Cast and moulded parts (individual production) by QUADRIGA - PURe quality

[Translate to Englisch:] Gießteile und Formteile von QUADRIGA

Giessteile und Formteile von QUADRIGA

Due to their good resistance to chemicals and lubricants, weathering and radiation, high compressive strength, very high abrasion resistance and the low deformation, polyurethane cast and moulded parts are perfectly suited for seals or components in devices and machines.

 

You can find further information here: www.quadriga-polyurethane.com

From polyurethane prototype to volume production - everything is possible

[Translate to Englisch:] Prototypen, Muster und Großserien aus Polyurethan

Prototypen und Muster aus Polyurethan von QUADRIGA

With powerful casting plants and the group's own mold construction, we offer you a highly flexible polyurethane assortment, from individual part to volume production. Cast and moulded parts (also with metal reinforcement) from QUADRIGA have a variety of possible applications, e.g. as construction- and supplied parts.

 

You can find further Information here: www.quadriga-polyurethane.com

Recycling of polyurethane-coated wheels and castors

[Translate to Englisch:] Räder-Recycling und Rollen-Recycling bei QUADRIGA

Räder-Recycling und Rollen-Recycling bei QUADRIGA

If the relevant wheel- or castor bodies are still in good condition, first we remove the worn old coating, prepare the metal parts accordingly by means of sandblasting, degreasing and a coating of adhesive primer, and finally recoat them. After a possible renewal of bearing elements, a practically new wearing part is produced. Cost-saving and environmentally friendly!

 

You can find further Information here: www.quadriga-polyurethane.com

Protective vice jaws

[Translate to Englisch:] Magnetische PUR-Schraubstock-Schutzbacken

Schraubstock-Schutzbacken

Elastic protective vice jaws made from polyurethane, 90 +-5 Shore A, brown, with glued in permanent magnets. Suitable for all sizes and types of parallel vices for metalworking. Wide lips enable simple attachment to the vice. Splinter-proof, non-slip and anti-scratch elastomer coating. We offer you three different types depending on your application. Ensures a soft, firm grip without the risk of damage. Clamping of workpieces with delicate, painted, coated or polished surface (e.g. stainless steel, glass,…)

 

You can find further information here: www.quadriga-polyurethane.com

PUR-Elastomer spring elements (available from stock)

[Translate to Englisch:] Weitere Infos finden Sie hier: www.quadriga-polyurethane.de

PUR-Elastomer Federelemente von QUADRIGA

Wear- and abrasion resistance combined with high damping behavior are decisive for the use in many items of plant equipment, and in comparison to conventional steel springs guarantee considerably longer service lives.

 

You can find further Information here: www.quadriga-polyurethane.com

PUR-Clutch packets (available from stock)

[Translate to Englisch:] PUR-Kupplungspakete (ab Lager verfügbar)

PUR-Kupplungspakete (ab Lager verfügbar)

Oval and rectangular clutch packets made from original VULKOLLAN®* D15, 90 +-5 Shore A, natural, or Polyurethane D44, 90 +-5 Shore A, Brown. VULKOLLAN® in natural colour, colour of polyurethane according to your wishes.

 

You can find further information here: www.quadriga-polyurethane.com

 

* VULKOLLAN® is a registered trademark of Covestro Group.

PUR-metal joints

[Translate to Englisch:] PUR-Metallverbindungen (individuelle Fertigung)

PUR-Metallverbindungen (individuelle Fertigung)

Polyurethane can be joined very highly adhesive with a variety of metallic and non-metallic materials. To ensure the necessary strength of the joint or enduring adhesion between metal and elastomer, both an appropriate design of the main body as well as professional pretreatment of the surfaces to be coated is required. Through such material combinations it is possible to produce appropriate reinforcements or coatings. The metal part thereby takes over the role of the load-bearing body, the polyurethane coating serves as wear protection, damping, noise reduction, soft support etc.

 

You can find further information here: www.quadriga-polyurethane.com

You have any question about our products?

please feel free to contact us using our form or contact your sales representative directly:

Jürgen Weihe

T +49 40 52 87 04-4412 | vertrieb.quadriga(at)spaeh.de

Water-jet cut parts

This cutting process without tool overhead assures high flexibility. It is best suited to the development of prototypes for test purposes and the precision cutting of single components or long production runs, as well as simple or complex 2D geometries. Another Bonus is the cutting of cellular materials without deforming them. By way of data, we need CAD files, preferably DXF or DWG, that can then be converted into the CNC program. You can also provide us with a sample, or communicate the dimensions to us, then we will produce the cutting program for you as an billable item.

Materials

  • Elastomers and plastics
  • all foamed materials 
  • Leather
  • Felt
  • Cork
  • Sandwich materials etc.
    > and much more

Over and above this, we can also cut special materials for you and we can also work with your own materials. You can find an overview of our most current material types on our material page.

Shapes, dimensions

Almost all non-metallic materials (except paper-based ones)

  • 3.000 mm in length and 2.000 mm in width
  • Thicknesses up to a maximum of 70 mm can be processed (depending on the material resistance)

    For borderline cases, we recommend a trial cut beforehand.

Used as the following products in all industry sectors:

  • Complex and delicate parts
  • Components
  • Elastomer moldings
  • Fitting parts
  • Flange applications
  • Flap wheels
  • Foam parts and foam material parts
  • Insulation elements
  • Precision parts
  • Profile sections
  • Prototypes and samples
  • Seals and sealing solutions
  • Small batches
  • Special parts
  • Special seals
  • VULKOLLAN® products
  • WAVE acoustic elements
  • Wheel bearing parts
  • and many more

Prototypes and small productions with water-jet cut

[Translate to Englisch:] Wasserstrahlgeschnittener Prototyp von SPÄH

Wasserstrahlgeschnittener Prototyp von SPÄH

We produce water-jet cut precision parts up in the size range of 3000 mm in length and 2000 mm in width. By way of data, we need CAD files, preferably DXF or DWG. You can also provide us with a sample, or communicate the dimensions to us, then we will produce the cutting program for you as an billable item.  

 

Visit download area for further information

 

Exact cutting of complex 2D geometries

[Translate to Englisch:] Wasserstrahlteile von SPÄH

Wasserstrahlteile von SPÄH

High flexibility without tool overhead! It is best suited for small batches or long production runs, as well as simple or complex 2D geometries. Processable materials are elastomers and plastics, all foamed materials, leather, felt, cork, sandwich materials etc. Over and above this, we can also cut special materials for you and we can also work with your own materials. You can find an overview of our most current material types on our material page.

 

Visit download area for further information

 

Embellishment cuts using water-jet

[Translate to Englisch:] Dekorationsschnitte per Wasserstrahl von SPÄH

2D Figur Pferd wasserstrahlgeschnitten

Individual 2D figures, cuts and molds made of various foams and plastics. Production in desired format. Materials are light, life-size figures are possible. Precisely according to your ideas.

 

Visit download area for further information

 

Precisely cut difficult materials

[Translate to Englisch:] Wasserstrahlschnitt von SPÄH eignet sich auch für komplexe Formen, z. B. Schablonen

Wasserstrahlschnitt eignet sich auch für komplexe Formen, wie z. B. Schablonen

The water-jet cut is also suitable for brittle, fragile and hard materials. The decisive advantage here is that no concavely conical cross sections are formed, as is the case with conventional stamps. Water compressed with a pressure of 3,000 to 4,000 bar is pressed through a nozzle with a 0.2 mm diameter. This provides a razor-sharp jet of energy. Complicated molds, e.g. templates, are no problem here.

 

Visit download area for further information

 

Straight cross sections and deformation-free cutting using a water-jet

[Translate to Englisch:] Futterhilfe für Pferde, wasserstrahlgeschnitten

Futterhilfe für Pferde, wasserstrahlgeschnitten

There are multiple areas of application for the water-jet cut. Whether ready-to-install seals, finished parts, complicated geometrics or, as can be seen in the image, simply just a feeding aid for horses: There are no limits set to your wishes.

 

Visit download area for further information

 

Absolutely parallel cuts via water-jet cut

[Translate to Englisch:] Wasserstrahlgeschnittene Gummiteile und Kunststoffteile von SPÄH

Wasserstrahlgeschnittene Gummiteile und Kunststoffteile von SPÄH

Another strength of water-cut technology lies in the deformation-free cutting of thick, cellular materials. Even with very soft materials, parallel cuts are guaranteed here. We can cut almost all non-metallic materials  – except paper-based ones. Depending on the material resistance, thicknesses up to a maximum of 70 mm can be processed. For borderline cases, we recommend a trial cut beforehand.

 

Visit download area for more information

 

You have any questions about our products?

please feel free to contact us using our form or contact your sales representative directly:

Jürgen Schröter

T +49 7572 602-170 | vertrieb.sued(at)spaeh.de