- Seals
Seals
We produce customized seals in all shapes and sizes.
Zur Internetseite
Your contact persons
Successful with SPÄH.
Flange seal
Material: Klingersil C4400
Process: stamping
Flange seals with screw holes. This product series makes it possible to achieve increased tightness by screwing the flange seal into position. This reduces the likelihood of the seal blowing out.
Seals for heating installations
Material: UNITEC 300 green
Process: stamping
This high-pressure seal is certified in accordance with the Elastomer Guideline (ELL) and thus complies with the German drinking water regulations. It prevents the escape of liquids and gases from pipelines and is therefore ideal for use in heating systems.
Housing seal for EV charging station
Material: silicone 60 red
Process: stamping
This product protects the components inside the control box by preventing the ingress of water, dirt and moisture.
- Rubber and plastic parts
Rubber and plastic parts
Parts and molds made of rubber and plastic – tailored to your unique requirements. Our experts will be happy to advise you.
Zur Internetseite
Your contact persons
Successful with SPÄH.
Paint protection
Material: UNITEC 300 green
Process: stamping (kiss-cut)
These small sheets are applied to the appropriate areas before the parts enter the coating line to protect them from the applied paint.
Pasta roller
Material: POM CFG
Process: turning & milling
Drinking water applications are subject to numerous regulations and specifications. Our product complies with the Elastomer Guideline (ELL) and thus meets the German drinking water requirements across all temperature ranges.
Transport roller
Material: Vulkollan®
Process: casting & forming
These small, nimble castors are used virtually everywhere. Almost silently, they bring the respective products and goods into the correct position.
Conveyor belt for chocolate
Material: silicone
Process: water-jet cutting
Our conveyor belt keeps the foodstuffs in the correct position during the production process. The finished product can then be easily removed from the belt’s surface.
Face mask strap
Material: PA 12
Process: 3D printing
The problem of pressure sores when wearing protective masks was not widely known until the COVID-19 pandemic. The mask strap allows the protective mask to be adjusted to fit the individual wearer.
- Semi-finished products
Semi-finished products
We have over 12,000 variants of elastomers, plastics as well as polyurethane and Vulkollan® immediately available from stock.
In our online store you will find detailed information about the properties of our semi-finished products, such as their resistance to gasoline, oil, alkalis, acids, weathering, as well as their temperature stability.
Your contact persons
Successful with SPÄH.
EPDM 60, 60+10-5 Sh.A black 1 inlay
Virginal PTFE, white
Klingersil C 4300 light green
Abil N dark gray, printed
Faserflex brown, unprinted
PE foam 1130 RG 33 anthracite
Inducon S 230 dark gray
AFM 38 green
Silicone 60, 60 +-5 Sh. A red
- Custom parts
Custom parts
We can produce samples, prototypes or small series according to your drawings or specifications. We can also machine a wide range of materials, including metals, metal-reinforced materials, and composites.
Zur Internetseite
Your contact persons
Successful with SPÄH.
Handle for charging station
Material: para rubber
Process: injection molding
Our handle is characterized by a consistently high-quality feel. This gives the user an increased feeling of safety when using the charging unit.
Surgical chair pedal
Material: para rubber
Process: injection molding
This molded rubber part allows the user to place the surgical chair in an optimal position. The flexibility of the material allows very precise and accurate adjustment.
- Designed Acoustic
Designed Acoustic
Acoustic solutions that adapt to the building’s architecture and unique design requirements.
You can learn more about the SPÄH designed acoustic product range on the separate DA website (link below).
Your contact persons
Successful with SPÄH.
greenPET baffle
Reusable with added value: the greenPET baffle made from up to 100% recycled PET bottles is available in virtually any shape and format as required.
This sustainable acoustic material comes in various designs and can be joined together to cover a large ceiling area.
Basotect® baffle
For those who want to dampen noise rather than expectations: the Basotect® baffle
These acoustic elements are manufactured in Germany and provide excellent acoustic attenuation thanks to the material’s special properties and the structure of the module.
Taller, wider, as a cube or wave: Every installation is exactly as you want it.
ceiling
Set sail for greater sustainability with our ceiling
The sustainable greenPET ceiling sail is available in various designs and is also suitable as a retrofit acoustic solution. We can also implement special sizes and customized options (such as integrated lighting) on request.
tiles
From plastic bottles to acoustic tiles
They suit any style and space – our acoustic tiles made from sustainable greenPET are available in five designs, which can be combined as desired. For those who prefer something even more unique, we can also create customized patterns in the tiles.
pinboard
For anyone with a lengthy to-do list, meet our pinboard
The acoustic pinboard made of recycled greenPET is a working material and acoustic solution in one. It can be easily attached directly to the wall via a suspension system. Of course, its acoustic effectiveness is not impaired by pins or pinned supports.
“air” divider
We get hung up on good ideas, like our “air” divider
Its excellent sound-absorbing efficiency, contemporary looks and sustainable acoustic material – made from up to 100% recycled greenPET bottles – make it the perfect suspended acoustic solution.
“floor” divider
Looking for sustainable acoustic solutions? Meet the “floor” divider
Just like us, this portable room divider is based on sustainable ideas. Quite literally – even its base is made from the greenPET. By the way, our “floor” divider can also be used as a pinboard.
tw@rkle and tw@rkle light
Make your work a pleasure with the tw@rkle and tw@rkle light
For open-plan offices and anyone with a lot on their plate at work – the tw@rkle ensures peace and quiet at any standing or seated workstation. To experience its benefits, simply place our transportable acoustic solution made of sustainable greenPET over your workstation.
deskboards
For private studies and open-plan offices: deskboards
These innovative desk absorbers are quick to install and ensure reduced noise and stress levels. Available in many colors and sizes and with rounded corners, they can also be used as pinboards.
circle
A well-rounded solution: the circle
This circular acoustic absorber is mounted to the ceiling or wall via wire cables attached to a thin aluminum frame on the rear of the device, and is available in different colors, sizes and designs. For “all-round” satisfied customers.
- Equimore
Equimore
A wide range of products including stall mats, riding arena edging and cavaletti is available from Equimore.
Find out more about Equimore’s product range by visiting the separate Equimore website (link below).
Your contact persons
Successful with SPÄH.
Cavaletti
Our cavaletti allow flexible training and are ideal for lunging, gymnastic work, ground work and jumps. Their low weight allows easy handling and reduces the risk of injury to both horse and rider.
SP Stall mat (interlocking)
The textured surface of our stall mat has anti-slip properties. It is easy to clean and reduces the risk of thrush and founder.
SP Trailer mat
The rib pattern on our trailer mat has as an anti-slip effect. The trailer mat is available in custom sizes to suit your requirements. Bubble hammer top on surface and ribbed pattern on underside, anti-slip.
SP trailer ramp mat
These ramp mats are ideal for the ramps on your horse or cattle trailer Patterned to prevent slipping and improve adhesion. Raised ridges at intervals for grip on surface and ribbed pattern on underside.
SP Paddock grid
The SP paddock grids are ideal for mounting on top of a subsurface (with no sealing). They can also be installed just as quickly in functional areas such as feeding areas, open running areas, stables, parking lots as well as for path reinforcement.
SP Paddock mat
Our SP Paddock mat is made from recycled rubber granulate, makes walking easier and is gentle on the joints. The mat eliminates tripping hazards due to its anti-slip surface, even in the rain. Also, the drainage system on the back of the mat allows water and other liquids to automatically drain away.
SP elastic pavement blocks
The SP elastic pavement blocks are laid on top of an even substrate to create a perfect walking surface in areas such as stable aisles, horse exercisers, tethering and washing stations, as well as entrances and exits to paddocks. 35 elastic pavement blocks are needed to cover one square meter.
SPÄH Straight edge (interlocking)
The SP straight edge for our stall mats prevents trip hazards and thus provides extra safety for horse and rider. It provides a safe edge for the stall mat. Thanks to the interlocking design, it is quick and easy to assemble.
SP PVC curtains
The SP PVC curtain is suitable for paddock stalls, open stalls, and passageways, and also protect horses from drafts, heat and cold from outside.
SP impact protection
Our impact protection mats have a granular structure and are ideal for stall and trailer walls.
SP PVC partition
Our PVC partitions are resistant to weathering and extreme temperatures, and also highly translucent. For example, they are ideal for use as partitions in horse trailers.
SP Hair remover
The hair remover is made from high-quality rubber and removes loose hair, old dander and ingrained dirt from the animal’s coat. It can also be used in sensitive areas such as the withers without problems.
SP Foam barrel
Do away with those blue plastic barrels and reward yourself with these beautiful, lightweight yet sturdy foam barrels in many different colors. An optional synthetic leather covering, which is also printable, can be applied to the barrel to make it weather resistant.
SP Bull
The Working Equitation Bull is made from polyethylene with a steel frame. The Cellasto ring is magnetically attached to the bull and can be rotated in any direction. It is extremely flexible yet stills sits securely on its mount.
Experience our products.
The mechanical processing of non-metallic materials is the SPÄH Group’s raison d’être. We see ourselves as a quintessential supplier of C-parts and thus as a service and solution provider for our customers. Our products are always part of a larger whole and therefore play a crucial role in ensuring that the respective end products can function optimally.